Quarter Sawn Red Oak Veneer Panel 0.45mm Wood Veneer AA Grade

• Veneer Cut: Quarter Cut / Pencil Grain

• Grade: Panel AA

• Length: ≥250 cm

• Width ≥12cm

• Thickness: 0.45MM

• Thickness Tolerance: +/-0.02MM

• Moisture Content: 8-12%

• Usage: Furniture, Fancy Plywood/MDF; Flooring,Door, Cabinet, Chest

TECHNIES SHEET:

ABOUT RED OAK:

The northern red oak is one of the most important oaks for timber production in North America. Quality red oak is of high value as lumber and veneer, while defective logs are used as firewood. Other related oaks are also cut and marketed as red oak, although their wood is not always of as high a quality. These include eastern black oak, scarlet oak, pin oak, Shumard oak, southern red oak and other species in the red oak group. Construction uses include flooring, veneer, interior trim, and furniture. It is also used for lumber, railroad ties, and fence posts.^{[citation needed]}

Scientific Name: Quercus rubra

Distribution: Northeastern United States and Southeastern Canada

Tree Size: 80-115 ft (25-35 m) tall, 3-6 ft (1-2 m) trunk diameter

Average Dried Weight: 44 lbs/ft3 (700 kg/m3)

Specific Gravity (Basic, 12% MC): .56, .70

Janka Hardness: 1,220 lbf (5,430 N)

Modulus of Rupture: 14,380 lbf/in2 (99.2 MPa)

Elastic Modulus: 1,761,000 lbf/in2 (12.14 GPa)

Crushing Strength: 6,780 lbf/in2 (46.8 MPa)

Shrinkage: Radial: 4.0%, Tangential: 8.6%, Volumetric: 13.7%, T/R Ratio: 2.2

ABOUT US:

Lonson Veneer Co.Ltd focus on producing and exporting wood veneers for 9 years. Our veneers include: Natural Wood Veneers, Fumed (smoked) Veneers, Rough Cut Veneer, Dyed Veneers, Reconstituted Veneers. All sizes are available, wood flooring veneers, furniture size, door size, Panel size. Grades A; A/B; C; C/D, Monthly capacity 500,000 sqm. Until now, we already exported to Indonesia, Vietnam, Malaysia, India, Pakistan, Bangladesh, UAE, Philippines,Korea, etc more than 20 countries. Clients like our quality wood veneers and always repeat orders. You are welcome to inquire for any demands.

WHY US:

1, Experienced wood veneers manufacturer and exporter for 9+ years.

2, Various kinds wood veneers, including Natural wood veneer, Dying veneer, Fumed veneer, Rough Cut veneer, Recomposed veneer, etc.

3, Different sizes and grades are all available. Wood Flooring veneer, Furniture size, door size, panel size, thickness from 0.4-2mm.

4, Professional and Considerate Service.

5, Fast Delivery and Continuous Supply.

EXPORT PACKAGE:

FACTORY SHOW:

Lonson Veneer Co.,Ltd was established in the year 2012, with more than 9 years in the wood veneers producing, exporting, our wood veneer already widely acceptable by the clients from more than 20 countries, like South Korea, UAE, India, Pakistan, Vietnam, Indonesia, Malaysia, Bangladesh, etc.

Our wood veneers species cover widely, species like white oak, red oak, white ash, American black walnut, cherry, maple, hickory, Burmese teak, ebony, pine, birch, basswood, apple wood, eucalyptus......are all available. Sizes also varies from wood flooring size to furniture size, door size, panel size. Different grades could be obtained accordingly.