Crown cut Red Oak Veneer Panel 0.5mm Wood Veneer AA Grade Furniture Door

• Veneer Cut: Crown cut

• Grade: Panel AA

• Length: ≥250 cm

• Width ≥12cm

• Thickness: 0.5MM

• Thickness Tolerance: +/-0.02MM

• Moisture Content: 8-12%

• Usage: Furniture, Fancy Plywood/MDF; Flooring,Door, Cabinet, Chest

TECHNIES SHEET:

ABOUT RED OAK:

Botanical Name: Quercus Rubra
Common Names: Northern Red oak, Eastern Red oak, Gray oak, American Red oak, Canadian Red oak, and Mountain Red oak
Sources: Grows in United States, Canada, and Europe.
Appearance: Straight grained with a coarse texture and prominent rays. Light reddish tan heartwood and narrow, almost white sapwood.
Physical Properties: Hard, strong, stiff, and strong with moderate stability in use and little natural decay resistance.
Working Properties: Machines quite well but has tendency to splinter and chip – avoid cutting against the grain. Turns and steam-bends fairly well. Somewhat difficult to work by hand. Nails and screws satisfactorily although pre-drilling recommended. Glues satisfactorily. Finishes well with most stains and finishes but relatively large pores may require a filler.
Uses: Used for cabinets, furniture, millwork, musical instruments, plywood, flooring, turnery, boxes, caskets, pallets, heavy construction, and many other applications.

Scientific Name: Quercus rubra

Distribution: Northeastern United States and Southeastern Canada

Tree Size: 80-115 ft (25-35 m) tall, 3-6 ft (1-2 m) trunk diameter

Average Dried Weight: 44 lbs/ft3 (700 kg/m3)

Specific Gravity (Basic, 12% MC): .56, .70

Janka Hardness: 1,220 lbf (5,430 N)

Modulus of Rupture: 14,380 lbf/in2 (99.2 MPa)

Elastic Modulus: 1,761,000 lbf/in2 (12.14 GPa)

Crushing Strength: 6,780 lbf/in2 (46.8 MPa)

Shrinkage: Radial: 4.0%, Tangential: 8.6%, Volumetric: 13.7%, T/R Ratio: 2.2

ABOUT US:

As a professional wood veneer manufacturer and exporter, we specialize in supplying and exporting Natural Wood Veneer, Fumed Wood Veneer, Dyed Wood Veneer, Rough Cut Wood Veneer, Reconstituted Veneer(Composed Veneer) and wood veneer edge banding. Natural Wood Veneer Species include: White Oak, Red Oak, White Ash, American Walnut, American Cherry, American Maple, Hickory, Burma Teak, Ebony, Pine, China Birch, Basswood, Apple Wood, Eucalyptus, etc. Furniture size, Door Size, Panel Size, Flooring sizes/thickness and different grades are all available. Welcome to inquire.

WHY US:

1, Experienced wood veneers manufacturer and exporter for 9+ years.

2, Various kinds wood veneers, including Natural wood veneer, Dying veneer, Fumed veneer, Rough Cut veneer, Recomposed veneer, etc.

3, Different sizes and grades are all available. Wood Flooring veneer, Furniture size, door size, panel size, thickness from 0.4-2mm.

4, Professional and Considerate Service.

5, Fast Delivery and Continuous Supply.

EXPORT PACKAGE:

FACTORY SHOW:

Lonson Veneer Co.,Ltd was established in the year 2012, with more than 9 years in the wood veneers producing, exporting, our wood veneer already widely acceptable by the clients from more than 20 countries, like South Korea, UAE, India, Pakistan, Vietnam, Indonesia, Malaysia, Bangladesh, etc.

Our wood veneers species cover widely, species like white oak, red oak, white ash, American black walnut, cherry, maple, hickory, Burmese teak, ebony, pine, birch, basswood, apple wood, eucalyptus......are all available. Sizes also varies from wood flooring size to furniture size, door size, panel size. Different grades could be obtained accordingly.